The January 2010 Professional Electronics Engineer Board Exam Results, also known as the January 2010 Professional Electronics Engineer Licensure Examination Results has been released. The Professional Regulation Commission (PRC) announces that 32 passed the Professional Electronics Engineer Examination given by the Board of Electronics Engineering in Manila this January 2010.

Roll of Successful Examinees in the PROFESSIONAL ELECTRONICS ENGINEER EXAMINATION Held in January 2010

AGRAVANTE, JANUARIO III UGBINAR
ALEJADO, BENJAMIN JR BERSABAL

BAGNOL, DIONILITO MANERA

I'm an architecture student in HAU here in Angeles City and I'm doing my thesis. just wanna ask if you guys could give me a structural computation/formula for solving the sizes and dimensions of a cantilever beem. Thanks in advance!

a 9m continuous beam is fixed at the left end with supports 6m and 9m from left. uniformly distributed load 3kN/m from 6m to 9m, triangular loading of 5kN/m from fixed end to 3m, and a negative moment of 10kN.m @ 4 from fixed end. computing for the reactions and moments. drawing the shear and moment diagram.

32 passed the Professional Mechanical Engineer Examination given by the Board of Mechanical Engineering in Manila, Al-Khobar, K.S.A., Abu Dhabi & Dubai, U.A.E. and Doha, Qatar last November and December 2009, the Professional Regulation Commission (PRC) announced. The members of the Board of Mechanical Engineering are Engr. Alfredo Y. Po, chairman; and Engr. Leandro A. Conti and Engr. Vicente B. Vosotros, members.

Professional Mechanical Engineer Examination November and December 2009:

A drainage pipe became completely blocked during a storm by a plug of sand, 1.5 m long, followed by another plug of sand, 1.5 meters long, followed by another plug of a mixture of clay, silts, and sand 0.5 meter long. When the storm was over, the water level above ground was 1 meter. The hydraulic conductivity of the sand is 2 times that of the mixture of clays, silts, and sands.
a) Calculate the porewater pressure at (1) center of the sand plug & (2) center of the mixture of clay, sands, and silts
b) Find the average hydraulic gradient in the mixture of sand, silt, and clay

Using algebraic differentiation, in an outreach activity, if equal distribution of goods is the goal with available containers to be purchased are either rectangular or cylindrical amounting to P90 and P95 respectively having a capacity of 4 cubic ft, which of the two containers should be purchased that will contain the most number of packed goods that could be placed in a 10 ft x 5 ft x 5 ft van?

Using algebraic differentiation, in an outreach activity, if equal distribution of goods is the goal with available containers to be purchased are either rectangular or cylindrical amounting to P90 and P95 respectively having a capacity of 4 cubic ft, which of the two containers should be purchased that will contain the most number of packed goods that could be placed in a 10 ft x 5 ft x 5 ft van?

i am just browsing around the net on reviews about the basic in our mechanics and strength of materials and i come across with this site.

i am on a comeback in the engineering world..i am studying in Rome for a requalification/recognition of my CE taken many years ago in RP..kaya heto review nang review...

thanks for this site...

ciao!

1. di magpabadlung kung gud na
2. di birahan ang sumsuman ky di na picnic
3. yaw dugaya ang baso ky napay sunod
4. yaw patuyang ug inom ky di rana imoha
5. ang giinom ediretso sa tiyan, di sa utok
6. pananghid tawn kung mouli na, di ky kalit lng kang mawagtang
7. pagdala ug kwarta arun naay ikaamot
8. yaw katulog atubangan sa mga katagay
9. ciguraduhang sa balay mouli kung hubog na
10. ug ayaw tilawi ang tupad dili cia sumsuman

http://www.mathalino.com/reviewer/mechanics-and-strength-of-materials/solution-to-problem-406-shear-and-moment-diagrams i have a problem simular to this however there is no weight on the right hand end.
should the stress force at the right hand end still equal 0?

Top 10 November 2009 Civil Engineer Board Exam

RANK NAME SCHOOL RATING 1 KRISTINA TING SHAN UNIVERSITY OF SAN CARLOS 97.55% 2 MARK JAYSON LAURENTE MAMBIL UNIVERSITY OF SANTO TOMAS 96.85% 3 ROMYR ZAMORA IWAYAN UNIVERSITY OF NEGROS OCCIDENTAL-RECOLETOS 96.65%

The Professional Regulation Commission (PRC) announced that 2,257 out of 4,878 (46.27%) passed the Civil Engineer Board Examination given by the Board of Civil Engineering in the cities of Manila, Baguio, Cagayan de Oro, Cebu, Davao, Iloilo, Legazpi and Tacloban this November 21 and 22, 2009.

The result of examination with respect to one (1) examinee was withheld pending final determination of his liabilities under the rules and regulations governing licensureexamination.